A room with a lot of desks and chairs

Acoustics

Office acoustics: designing a quieter workplace

How to plan office acoustics and soundproofing: absorb, block and cover, from open-plan floors to meeting rooms.

Good office acoustics let people concentrate at their desks, speak confidentially in meeting rooms and take calls without disturbing others. The approach is usually summarised as absorb, block and cover: absorb sound with acoustic ceilings, panels and soft finishes; block it with well-built, well-sealed partitions and doors; and cover what remains with background sound where needed. This guide explains how to plan office acoustics, where office soundproofing matters most and how to make acoustic treatment part of the interior rather than an afterthought.

Why office acoustics matter

Most offices today are built from hard, reflective materials: glass partitions, exposed or plasterboard ceilings, hard floors and long runs of desks. Sound travels easily in these spaces. The usual complaints are familiar: conversations that carry across the floor, meeting rooms where you can hear the next room, video calls with a hollow echo and a general level of noise that makes concentration tiring.

These are design problems with design solutions. Acoustic decisions are cheapest and most effective when they are made during space planning, before ceilings and partitions are fixed.

Absorb, block, cover

Absorb

Absorbent surfaces reduce reverberation, so sound does not build up. In an open-plan office the ceiling is the largest surface and usually the most important to treat, whether with acoustic ceiling tiles, slatted timber, baffles or suspended rafts. See our page on acoustic ceiling panels. Carpet or acoustic underlay, fabric wall panels, upholstered furniture and curtains all add to it.

Block

Blocking stops sound travelling from one space to another. It depends on mass, airtightness and continuity. A meeting room partition that stops at the ceiling tiles, with an open plenum above, lets sound pass straight over the top. Glass partitions need appropriate glass and good seals. Doors need full perimeter seals and drop seals. This is where office soundproofing is won or lost.

Cover

In very quiet offices, small sounds become more noticeable. A low, even background sound, from a sound masking system or from mechanical ventilation, can make speech from nearby desks less intelligible and therefore less distracting. Masking should be set up by a specialist and used alongside absorption, not instead of it.

Office soundproofing for meeting rooms and private offices

Meeting rooms, private offices and HR or legal rooms need speech privacy. Common points to check:

  • Partitions to the slab. Run partitions full height to the structural slab, or add an acoustic barrier in the ceiling void above them.
  • Insulated stud walls. Fill partition cavities with acoustic insulation and use dense boards, sealed at junctions.
  • Glazing. Glazed fronts look open but leak sound if the glass or frames are lightweight. Specify glass and framing systems with tested acoustic performance where privacy matters.
  • Doors. Solid-core or acoustic doors with seals all round. An undercut door is a large gap.
  • Services. Ducts, cable trays and back-to-back power outlets can carry sound between rooms. Line ducts and offset outlets.

Office fit-outs are usually subject to landlord or building management requirements, and work affecting fire safety, egress or structure may need a qualified professional and authority approval. Check with your building and project team early.

Planning the floor with acoustics in mind

  • Zone by noise. Put collaborative areas, pantries and reception away from focused desks. Use storage, joinery and meeting rooms as buffers.
  • Provide quiet rooms. Small phone rooms and focus rooms take pressure off the open floor.
  • Break up long sightlines. Screens, planting, bookcases and acoustic furniture interrupt sound paths between desk clusters.
  • Treat the pantry. Pantries and breakout spaces are often the loudest areas. Absorbent ceilings and soft seating help.
  • Design for video calls. Meeting rooms with all-glass walls and hard ceilings sound poor on calls. Add absorption to at least two surfaces, ideally the ceiling and one wall.

Acoustics for hybrid work

Hybrid working has changed what offices need to do. More people take video calls from their desks, and meeting rooms are used for calls with remote colleagues as much as for in-person meetings. That makes absorption more important in small rooms and puts pressure on open floors.

  • Add enough small rooms and booths for calls. A common complaint is that there are too few.
  • Treat meeting rooms for clear speech on microphones: absorbent ceilings, a fabric wall and a soft floor.
  • Agree simple etiquette for desk calls, such as headsets and designated call zones.
  • Review the layout after a few months of use. Noise problems often reveal themselves only once people settle in.

Measuring before and after

For larger fit-outs, an acoustic consultant can measure reverberation and sound insulation on site, set targets and check the result after installation. That gives you evidence rather than impressions, and it helps resolve any disputes about performance.

Making acoustic treatment look intentional

Acoustic finishes can carry a brand’s material palette. Felt in a corporate colour, timber slats that match joinery, fabric walls in meeting rooms and stone or carpet that suit the reception all do acoustic work quietly. Treatment planned with lighting and ceilings can sit flush with the architecture, rather than appearing as panels stuck to walls afterwards.

Space Typical acoustic priority Common finishes
Open-plan workspace Absorption, zoning Acoustic ceilings, carpet, screens
Meeting rooms Blocking, then absorption Full-height partitions, sealed doors, fabric wall panels
Private offices Speech privacy Insulated partitions, acoustic doors, rugs
Reception Absorption, calm first impression Slatted timber, upholstered seating, carpet
Pantry and breakout Absorption Ceiling rafts, soft seating, felt

Budgeting

Costs vary with floor area, ceiling height and how much partition work is needed. As one indicator, a Singapore acoustic supplier’s 2026 guide estimates a starting budget of about S$4,625 to S$9,250 for fabric wall panels in a 50 to 150 m² open-plan zone, before extras such as access equipment or after-hours work. Partitions, acoustic doors, glazing and ceilings are priced separately and usually form the larger share. Prices vary with size, specification and site, and they are not a Keneki quote.

Retrofitting acoustics after move-in is usually more expensive and less effective than designing them in. If you are planning a fit-out, include acoustic performance in the brief from the start.

How Keneki approaches office acoustics

Our K Commercial studio plans workplaces around how people actually use them, and our K Acoustics studio sets the acoustic intent for each space. Keneki manages the work end to end, with partitions, ceilings and finishes installed by our partner contractors. To learn more about our workplace design, see office interior design, or arrange a consultation to discuss your office.

Frequently asked questions

How can I reduce noise in an open-plan office?

Treat the ceiling with absorbent panels, add carpet or soft flooring, zone noisy and quiet activities apart and provide small rooms for calls and focused work.

Why can I hear the next meeting room?

Common causes are partitions that stop at the ceiling grid, unsealed doors, lightweight glazing and shared ducts. Each needs to be addressed for good speech privacy.

What is sound masking?

A low, even background sound that makes nearby conversations less intelligible. It works best alongside absorption and good partitions, and should be set up by a specialist.

Is it better to plan acoustics before or after a fit-out?

Before. Partitions, ceilings and services are far easier to get right during design than to correct after the office is occupied.

Further reading

WhatsApp